MLX90392
Melexis Triaxis 3D µPower Magnetometer
Magnetic range for
compass or position sensing
I2C interface
UTDFN-8
package
(2.5x2mm)
Melexis Triaxis 3D µPower Magnetometer IC
Absolute measuring three-dimensional micro-power position sensor with Melexis
Triaxis technology and IMC-disk (Integrated Magnetic Concentrator) based on the
Hall effect for cost effective battery powered applications such as non-contact position determination of a magnet in joystick, linear,
rotary. on- or off-axis applications as well as for compass applications.
Application mode, refresh rate and filter can be configured in the NVRAM by a microcontroller trough the integrated I2C interface. The small UTDFN-8 package and the low power consumption (1.5µA power-down) allow a wide range of
applications. A simple axial or diametral magnet is sufficient for control.
Features
- I2C interface
- Operating voltage 1.65 ... 1.95V
- Micropower (1.5µA power down)
- Output of X-, Y-, Z-axis and temperature in 16 Bit
- Magnetic range variants for
±5mT or
±50mT available
- Output refresh rate 700Hz (XYZT) or 1400Hz (XYZ, w/o thermal compensation)
- Three function modes: "Single Measurement", "Continuous"
(10Hz~1.4kHz) and "Power-down"
- Configurable in the application via a µC
- Operating temperature -40...+85°C
-
8 pin UTDFN-8
package
(2.5 x 2 x 0.4 mm)
(see datasheet for details)
Suitable magnets can be found in the shop under Magnets.
If you need further information on product variants and scale prices please contact us.
Video of the MLX90392 Triaxis 3D Magnetometer for Industrial & Consumer Applications
Video of the MLX90393 Triaxis 3D Magnetometer for Industrial & Consumer Applications
Video of the MLX90395 Triaxis 3D Magnetometer for Automotive Applications
Webinar about the MLX90395 Triaxis 3D Magnetometer for Automotive Applications
Video of the MLX90397 Triaxis 3D Magnetometer for Industrial & Consumer Applications
Accessories & alternatives
