Our office is closed from 21st of December 2024 until 1st of January 2025. Orders will be processed from CW01/2025 on.

MLX90393SLW-ABA-014

Product information "MLX90393SLW-ABA-014"

Melexis Triaxis 3D µPower Magnetometer
Sensitivity programmable
I2C & SPI
QFN (3x3mm), UTDFN-8 (2.5x2mm) or WL-CSP (1.27x1.27mm)

Melexis Triaxis 3D µPower Magnetometer IC

Absolute measuring three-dimensional micro-power position sensor with Melexis Triaxis technology and IMC-disk (Integrated Magnetic Concentrator) based on the Hall effect for non-contact position determination of a magnet in joystick, linear, rotary or off-axis applications.
The sensitivity can be configured in the EEPROM resp. NVRAM by microcontroller trough 3-wire or 4-wire SPI interface as well as via the integrated I2C interface. The small QFN 3x3 package (alternatively chipscale 1.27x1.27mm) and the low power consumption (<5µA idle) allow a wide range of applications. A simple axial or diametral magnet is sufficient for control.

Features
- 3wr or 4wr SPI interface
- alternatively I2C interface
- Operating voltage 2.2 ... 3.6V
- Low-voltage I/O (from 1.65V)
- Micropower (from 1µA idle)
- Output of X-, Y-, Z-axis and temperature in 16 Bit
- Measuring range up to 50mT
- Sensitivity programmable (from 0.161µT/LSB)
- Three function modes: "Single Measurement" mode, "Burst Mode" and "Wake-up On Change" mode
- programmable and configurable in the application via µC
- Temperatures from -40...+85°C (depending on type)
- Package QFN16 3x3mm (16 pin), UTDFN-8 2.5x2mm (8 pin) or chipscale WL-CSP (1.27x1.27mm, bumped wafer with 8 bumps)
(see datasheet for details)

Suitable magnets can be found in the shop under Magnets.

If you need further information on product variants and scale prices please contact us.


Video of the MLX90392 Triaxis 3D Magnetometer for Industrial & Consumer Applications


Video of the MLX90393 Triaxis 3D Magnetometer for Industrial & Consumer Applications


Video of the MLX90395 Triaxis 3D Magnetometer for Automotive Applications


Webinar about the MLX90395 Triaxis 3D Magnetometer for Automotive Applications


Video of the MLX90397 Triaxis 3D Magnetometer for Industrial & Consumer Applications

Ordering options
Temperature Code:
- S = Temperature range -20°C~85°C
- E = Temperature range -40°C~85°C
Package Code:
- LW = QFN16 3x3mm
- LQ = UTDFN8 2.5x2mm
- UB = Bumped DIE (Chipscale/WL-CSP)

The following versions can be ordered
MLX90393SLW-ABA-011 (QFN 3x3; -20°C~85°C; I2C address 0x03h)
MLX90393ELW-ABA-011 (QFN 3x3; -40°C~85°C; I2C address 0x03h)
MLX90393SLW-ABA-012 (QFN 3x3; -20°C~85°C; I2C address 0x04h)
MLX90393ELW-ABA-012 (QFN 3x3; -40°C~85°C; I2C address 0x04h)
MLX90393SLW-ABA-013 (QFN 3x3; -20°C~85°C; I2C address 0x05h)
MLX90393ELW-ABA-013 (QFN 3x3; -40°C~85°C; I2C address 0x05h)
MLX90393SLW-ABA-014 (QFN 3x3; -20°C~85°C; I2C address 0x06h)
MLX90393ELW-ABA-014 (QFN 3x3; -40°C~85°C; I2C address 0x06h)
MLX90393SLQ-ABA-011 (UTDFN-8 2.5x2; -20°C~85°C; I2C address 0x03h)
MLX90393EUB-ABA-021 (Bumped DIE; -40°C~85°C)

If you need further information on product variants and scale prices please contact us.