MLX90367LDC-ABU-000
| Quantity | Unit price |
|---|---|
| To 9 |
€5.96*
|
| To 49 |
€4.10*
|
| From 50 |
€3.46*
|
Availability on request, please contact our sales department.
Melexis Triaxis Linear & Rotary Position Sensor
ASIL-ready, multipoint characteristic, single or dual DIE, SENT, automotive -40...+150°C
Melexis Triaxis 3D Linear & Rotary Position Sensor MLX90367 as Single-DIE (SOIC8) or Dual-DIE (TSSOP16)
ASIL-capable, absolute measuring linear and rotary position sensor with
Melexis Triaxis technology and IMC- disk (Integrated Magnetic Concentrator)
based on the Hall effect. Suitable for non-contact linear and rotary
position sensing as well as 1/2 joysticks or travel levers.
The sensor has a SENT interface according to SAE J2716-2010.
Thanks to the wide range of diagnostic options, this sensor is particularly
suitable for use in applications with increased functional safety
requirements according to ISO 26262 / IEC 61508 or SIL or ASIL
(safety manual available upon request).
A simple axial or diametral magnet is sufficient for control.
Features
- Output characteristic freely configurable (0...5V)
- Linearisation depending on firmware with up to 17 interpolation
points or or 16 segments
- Angle calculation options for linear, rotary or 1/2 joystick movement
- SENT interface according to SAE J2716-2010
- Extensive diagnostics (ASIL-Ready)
- Temperature range -40...+150°C (automotive)
- Operating voltage 5V (4.5~5.5V)
- Available as single DIE (SOIC-8) or Dual-DIE (TSSOP-16)
- Chip revision "ABS", "ABU" (3p linearisation) or "ABV" (17p linearisation)
(details see data sheet)
The ICs are unprogrammed and can only be reprogrammed or adapted to the magnetic design by a Melexis Programmer PTC-04.
Triaxis® & Hall Selection Guide (automotive)
Triaxis® & Hall Selection Guide (industrial & consumer)
Magnet Selection guide for homogenous field - Rotary only
Suitable magnets can be found here.
Ordering Options
Temperature Code:
- E = Temperature range -40°C~85°C
- K = Temperature range -40°C~125°C
- L = Temperature range -40°C~150°C
Package Code:
- DC = SOIC-8
- GO = TSSOP-16
DIE & Firmware Version:
- "ABS", "ABU" (3p linearisation) or "ABV" (17p linearisation).
Option Code:
- xxx-090: standard
(For further details see data sheet)
If you need further information on product variants and scale prices please contact us.
