MLX90394
Melexis
tiny
Triaxis 3D µPower Magnetometer
Selectable magnetic range ±5mT or ±50mT
Two selectable I2C slave addresses per device
Small UTDFN-6
package
(2x1.5x0.4mm)
Melexis Triaxis 3D µPower Magnetometer IC
Absolute measuring three-dimensional micro-power position sensor with Melexis Triaxis technology and IMC disk (Integrated Magnetic Concentrator) based on the Hall effect for cost-effective battery-powered applications such as the contactless position determination of a magnet for joystick, linear, rotary, on- or off-axis applications in gaming and industrial peripherals. The magnetic range (±5mT or ±50mT), the integrated digital filters and the basic configuration (low current, low noise, high range) can be configured in the NVRAM by a microcontroller via the integrated I2C interface. In addition, the sensor has wake-up modes that allow the system to go into deep sleep until the sensor detects a change in the magnetic field on the selected axes compared to either a measurement (Static Delta), a previous measurement (Dynamic Delta) or a predefined absolute threshold value (Absolute). In this way, both moving and slowly drifting magnetic fields can be registered while the sensor automatically switches between active and sleep mode. The small UTDFN-6 housing and low power consumption (0.7μA power-down) enable a wide range of applications. A simple axial or diametrical magnet is all that is needed for operation.
Features
- I2C interface (0.1MHz, 0.4MHz & 1.0MHz)
- Two selectable I2C slave addresses per sensor & two sensor variants, in total 4 slave addresses possible
- Data-ready output for µC synchronisation
- Operating voltage 1.7 ... 3.6V
- Micropower from 0.7μA (power-down)
- Output of X-, Y-, Z-axis and
temperature
in 16 Bit
- Integrated temperature compensation
- Magnetic range Bx/y ±5mT (0.15μT/LSB) or ±50mT (1.5μT/LSB); Bz up to ±200mT
- Output refresh rate selectable up to 1400Hz (XYZ) or 1000Hz (XYZT)
- Three selectable configurations: Low Current, Low Noise & High Range
- Configurable in the application via µC
- Operating temperature -40°C
... +105°C
- 6-pin UTDFN-6 package (2.0 x 1.5 x 0.4 mm)
(see datasheet for details)
Suitable magnets can be found in the shop under Magnets.
If you need further information on product variants and scale prices please contact us.
Data Sheet of the Melexis Triaxis 3D µPower Magnetometer Sensor MLX90394
Product Flyer for the Melexis Triaxis 3D µPower Magnetometer Sensor MLX90394
Melexis Triaxis Selection Guide for industrial & consumer
Application Note: How to use a magnetometer in a position sensor application
Labview GUI as described in the MLX90394 EVB application note
MLX90394 - Firmware for Arduino®
If you require technical support please contact us.
Video of the MLX90392 Triaxis 3D Magnetometer for Industrial & Consumer Applications
Video of the MLX90393 Triaxis 3D Magnetometer for Industrial & Consumer Applications
Video of the MLX90395 Triaxis 3D Magnetometer for Automotive Applications
Webinar about the MLX90395 Triaxis 3D Magnetometer for Automotive Applications
Video of the MLX90397 Triaxis 3D Magnetometer for Industrial & Consumer Applications
Accessories & alternatives
Magnets
