MLX90378GDC-ABJ-300

Melexis Triaxis 3D & Joystick Position Sensor MLX90378 Gen.III

ASIL-C | optionally with SENT or PWM output | +160°C

ASIL-C capable, absolute measuring 3D and joystick position sensor with Melexis Triaxis technology and IMC-disk (Integrated Magnetic Concentrator) based on the Hall effect. Suitable for non-contact linear and 3D position measurement as well as for joysticks or drive levers.

A simple axial magnet is sufficient for control.

Features
- SENT output according to SAE J2716 (APR2016), optionally one PWM output per axis
- Functionally compatible with MLX90333 or MLX90363
- Output characteristic freely configurable (0...100% or 0...4095bit)
- Multi-point linearisation with 4 interpolation points per axis
- 9-point solver for joysticks with a square gate
- External INPUT pin for sensing an analog, switch or PWM signal (output via SENT)
- ASIL-C Ready (ISO26262/SEooC)
- Temperature range -40...+160°C (automotive)
- Operating voltage 5V (4.5~5.5V) or 12V (6~18V)
- Single-DIE (SOIC-8) or Dual-DIE (TSSOP-16)
- Chip revision "ABJ“
(see data sheet for details)

The ICs are unprogrammed and can only be reprogrammed or adapted
to the magnetic design by a Melexis Programmer PTC-04 fitted with Daughterboard HALL06 .

MLX90378 Datasheet

MLX90378 Product flyer

Triaxis® & Linear Hall Selection Guide

Suitable magnets can be found in the shop under " Magnets ".

Ordering Options
Temperature Code:
- G = Temperature range -40°C ... +160°C
Package Code:
- DC = SOIC-8 (Single-DIE)
- GO = TSSOP-16 (Dual-DIE/Redundant)
DIE & Firmware Version:
- "ABJ"
Option Code:
- 3xx: 3D/Joystick Position
SW & DMP Option:
- x0x SOIC-8/TSSOP-16: SENT 3µs Mode
Option Code:
- xx0: Default

The following variants can be ordered
MLX90378GDC-ABJ-300 [SO-8]
MLX90378GGO-ABJ-300 [TSSOP-16]

If you need further information on product variants and scale prices please contact us.