MLX90366LVS-ADU-253
Melexis Triaxis Linear & Rotary Position Sensor
ASIL-Ready, PCB-Less, Multipoint, Single DIE with integrated
circuitry (DMP-4), SENT, -40...+150°C
Melexis Triaxis 3D Linear & Rotary Position Sensor MLX90366
in dual-mold package including external basic circuitry for
PCB-less design (4-pin, single DIE)
ASIL-capable, absolute measuring linear and rotary position sensor with
Melexis Triaxis technology and IMC-disk (Integrated Magnetic Concentrator)
based on the Hall effect. Suitable for non-contact linear and rotary
position sensing and 1/2 joysticks or travel levers.
The function is based on the Linear & Rotary Position Sensor MLX90367
with SENT interface according to SAE J2716-2010.
Thanks to the wide range of diagnostic options, this sensor is suitable
for use in applications with increased functional safety requirements according
to ISO 26262 / IEC 61508 resp. SIL or ASIL (safety manual available upon request).
A simple axial or diametral magnet is sufficient for control.
The special feature of this sensor is the integrated basic
circuitry with four capacitors.
This means, there is no need for a printed circuit board and the sensor
can be wired directly - for example, welded onto a copper carrier.
Features
- Output characteristic freely configurable (0...5V)
- Linearisation, depending on firmware, with up to 17 interpolation
points or or 16 segments
- Angle calculation options for linear, rotary or 1/2 joystick movement
- SENT interface according to SAE J2716-2010
- Extensive diagnostics (ASIL-Ready)
- Temperature range -40...+150°C (automotive)
- Operating voltage 5V (4.5~5.5V)
- Single DIE
- Chip revision "ADS" (improved EMC), "ADT" (with MEMLOCK) or
"ADU" (compatible with SENT 2007/2008/2010)
- 4-pin dual-mould package (DMP-4)
(details see data sheet)
The ICs are unprogrammed and can only be reprogrammed or adapted to the magnetic design by a Melexis Programmer PTC-04.
Triaxis® & Hall Selection Guide (automotive)
Triaxis® & Hall Selection Guide (industrial & consumer)
Magnet Selection guide for homogenous field - Rotary only
Suitable magnets can be found here.
Ordering Options
Temperature Code:
- L = Temperature range -40°C~150°C
Package Code: VS = DMP-4
DIE & Firmware Version: "ADS", "ADT" or "ADU".
Trim & Form Option:
- 250: Standard RM1.27
- 251: Trim & Form STD1 RM2.54
- 253: Trim & Form STD2 RM2.54 (with bead)
(see data sheet par. 19.1 to 19.3)
The following variants can be ordered
MLX90366LVS-ADS-250
MLX90366LVS-ADS-251
MLX90366LVS-ADS-253
MLX90366LVS-ADT-250
MLX90366LVS-ADU-250
MLX90366LVS-ADU-251
MLX90366LVS-ADU-253
If you need further information on product variants and scale prices please contact us.