MLX90360KGO-ACD-000
Melexis Triaxis Linear & Rotary Position Sensor
Configurable multipoint characteristic curve, single or dual DIE, temperatures -40...+150°C
This product is not recommended for new designs!
Please use the successor product MLX90365 or request an alternative product from us.
Link to successor product MLX90365
Melexis Triaxis Linear & Rotary Position Sensor
Absolute measuring linear, rotary and 1/2 joystick position sensor with Melexis Triaxis technology and IMC-disk (Integrated Magnetic Concentrator) based on the Hall effect. Suitable for non-contact linear and rotational position sensing.
A simple axial or diametral magnet is sufficient for control.
Features
- Freely configurable output characteristic
- Linearisation with up to 17 interpolation points or 16 segments
- Angle calculation options for linear, rotation or 1/2 joystick movement
- Analog output (12bit) or PWM (12bit)
- Alternatively pre-programmed variants
- Temperature ranges from -40...+150°C
- Operating voltage 5V (4.5~5.5V)
- Single DIE or Dual DIE (fully redundant)
- Chip revision "ACD“
- Package 8pin SOIC8 or 16pin TSSOP16
(details see data sheet)
The ICs are partly unprogrammed and can only be reprogrammed or adapted to the magnetic design by a
Melexis Programmer PTC-04.
Pre-programmed variants are locked and cannot be further modified!
Triaxis® & Linear Hall Selection Guide
Options
Temperature Code:
- E = Temperature range -40°C~85°C
- K = Temperature range -40°C~125°C
- L = Temperature range -40°C~150°C
Package Code:
- DC = SOIC-8
- GO = TSSOP-16
Option Code:
- AAA-xxx: DIE version
- xxx-000: standard
- xxx-200: PPA (Pre-Programmed Analog)