MLX90324LDC-DBO-000
Melexis Triaxis rotation angle sensor
with up to 16 points linearization
SENT, PWM or analog
Single or Dual DIE
Temperature -40...+150°C
Melexis Triaxis rotation angle sensor
Absolute measuring angle sensor with Melexis Triaxis technology and IMC-disc (Integrated
Magnetic Concentrator) based on the Hall effect. Suitable for non-contact potentiometers,
throttle valves, control levers, steering angle or position sensors.
A simple diametral magnet is sufficient for control.
Features
- Programmable characteristic curve with up to 16 interpolation points
- Output optionally PWM, analog or SENT protocol (SAE-J2716; 2007)
- Temperature range -40...+150°C
- Operating voltage 5V (4.5~5.5V)
- Revision "DBO“
- Single DIE or Dual DIE (fully redundant)
- Package 8pin SOIC8 or 16pin TSSOP16
(please refer to the datasheet for details)
The ICs are unprogrammed and can only be reprogrammed or adapted to the magnetic design by a Melexis Programmer PTC-04.
Pre-programmed variants are locked and cannot be further modified!
Triaxis® & Hall Selection Guide (automotive)
Triaxis® & Hall Selection Guide (industrial & consumer)
Suitable magnets can be found here.
Ordering options
Temperature Code:
- L = Temperature range -40°C~150°C
Package Code:
- DC = SOIC-8
- GO = TSSOP-16
Option Code:
- xxx-000: standard
The following variants can be ordered
MLX90324LDC-DBO-000
MLX90324LGO-DBO-000
If you need further information on product variants and scale prices please contact us.