MLX90637 Automotive Single Pixel Thermal FIR Sensor
The MLX90637 is based on the hardware of a proven in use commercial part and is qualified to target automotive grade applications.
Key features
- world’s first automotive grade SMD infrared temperature sensor
-
miniaturized form factor (3x3x1mm)
-
factory calibrated
-
high precision non-contact temperature measurements
Application examples
- any application that requires SMD, small form factor, elevated (up to 125°C) operating temperature and/or automotive qualification
- power semiconductor surface temperature (e.g. in traction inverter)
-
bus bar (e.g. in traction inverter)
-
stator/rotor winding temperature measurement
-
thermal management of cooling circuits (e.g. traction inverter / battery pack/ ECU)
-
in cabin temperature for HVAC
Product description
The MLX90637 is a non-contact infrared tempera-ture sensor in a small SMD Chip-scale package. The device is factory calibrated with calibration constants stored in the EEPROM memory. The ambient and object temperature can be calculat-ed externally based on these calibration constants and the measurement data.
The MLX90637 is highly resistant to temperature fluctuations in its environment, ensuring accurate measurements. Localized thermal variations, such as air turbulence, will not affect the thermopile's output signal.
The supply voltage of the MLX90637 is 3.3V. For the I2C communication with the master microcon-troller, the MLX90637 supports 3.3V I2C bus volt-age.
An optical filter is integrated in the sensor to pro-vide ambient light immunity. The wavelength pass band of this optical filter is from 2 to 20μm.
To facilitate development, an Evaluation Board (Datasheet of EVB90637) is available.
Features and benefits
-
High precision non-contact temperature measurements
-
Factory calibrated
-
Standard measurement resolution 0.02°C
-
- Small size of 3x3mm2
- Field of View of 50°
-
Operating range
-
Ambient operating temperature from -40°C to 125°C
-
Supply for 3.3 V applications
-
Sleep current less than 2.5μA
-
- Integrated post-calibration option
- Wide refresh rate range
- I2C interface
- Software definable I2C address with 1 LSB bit external address pin
- Package RoHS compliant SFN 5-pin
- AEC-Q100 qualified
Documents and tools
Datasheet(s)
Product flyer(s)
Selection guide(s)
If you have further questions please contact our team.
Alternative Products
